Product Overview

Replacement Parts

Replacement parts are coming soon

Parts List:

Setting	Description
	Press the MODE button to switch to "Bluetooth" Mode. Please refer to the APP Operation Instructions.
LIGHTS ONLY	This switch mode will activate only the LCD eyes and lights of the item indefinitely until the switch mode is changed from the lights only setting.
OFF/STEP PAD	In this mode, the item activates for one cycle only when triggered by a Step Pad or Try Me Button (not included). It remains off otherwise.
TIMER/SENSOR	In this mode, the sensor is active for 6 hours, then off for 18, repeating daily. During the active period, the IR sensor triggers one animation and sound cycle when motion is detected within 4 m (13 ft) and an 80° range.
	Adjustable dial; turn all the way down to mute.

Adapter must be tightly screwed in at the Function Control Box and plugged into a wall outlet.
Switch on the control box should be set to your preferred mode.
If not functioning properly (e.g. the mouth doesn't move, eyes don't move or blink, left arm doesn't move, lantern doesn't light up), ensure that cables are connected to their corresponding cable as shown in the instruction sheet.
Be sure nothing is blocking movement or caught in moving parts.
Ensure the base surface is flat and nothing blocks the movement.
Check that the speaker volume is turned up.
The control box has a red light indicator.
Indoor item.

Q: What adapter should I use with a 7 ft. Animated LED App Controlled Lethal Lily?

Q: What is the product box size?

A: The product box size: