4.5 ft. Color Changing LED Groundbreaker

Product Overview

  • Model Number: 26SV25435
  • Height: 4.5 feet
  • Poseable jaw and arms
  • Lighting: LED illuminated chest, mouth and eyes
  • Lighting Modes: 8 different color options or dynamic color-changing mode
  • Activation: Infrared motion sensor
  • Indoor/Outdoor
  • Power Requirements: 1.5A Outdoor Adapter

Replacement Parts

Replacement Parts are coming soon

Parts List:

Assembly Instructions

Control Box Settings

Setting

Description

LIGHTS ONLY Lights activate indefinitely until the setting is changed.
OFF/STEP PAD All features are off unless activated by an optional Step Pad or Try Me Button(not included).
TIMER Set to TIMER mode to keep lights on for 6 hours, then off for 18 hours, repeating automatically until changed.

LED MODE

Press this button to cycle through different chest LED color options. These options include color changing, red, yellow, green, aqua, blue, purple, and white.

Important Setup Tips

  • Adapter must be tightly screwed in at the Function Control Box and plugged into a wall outlet.
  • Switch on the control box should be set to your preferred mode.
  • If not functioning properly, ensure that cables are connected to their corresponding cable as shown in the instruction sheet.
  • The control box has a red light indicator.
  • Indoor/Outdoor item.

Troubleshooting & FAQs


Q: What adapter should I use with a 4.5 ft. Color Changing LED Groundbreaker?

A: This item requires a 1.5A Outdoor Adapter.


Q: What is the size of the box for this product?

A: The product box size:

  • Height 18.9 in.
  • Width 43.38 in.
  • Depth 28.78 in.

Q: Why do the eyes not light up??

A:  Check and ensure that all cables are connected to their corresponding cable as shown in the instruction sheet (See step 5.2).


Q: Why does the item not activate or turn ON??

A: Check that the adapter is properly connected with the threaded cap fully tightened to your prop and is plugged into a live outlet. (See page 3)
Next, check and ensure that there is power to your prop by checking for the red indicator light on the control panel. If there is power, a red indicator light will light up on the control box. If the red light indicator is set to "OFF", please change it to "ON" or "TIMER."