Product Overview
- Model Number: 25SV24764
- Height: 4 ft.
- Motion: Head and mouth, hands wave and eyes blink
- Sound: Speaks 5 different classic Olaf phrases
- Lighting: LED eyes and ice base
- Activation: Infrared motion sensor
- Indoor item
-
Power Requirements: 3A Indoor Adapter
Replacement Parts
Purchase Replacement Parts here
Limited stock: Parts available while supplies last!
Assembly Instructions
- Recommended: 1 adult
- Ensure: All parts are properly connected as shown in the instruction manual
- Download: Parts List and Assembly Instructions PDF
Control Box Settings
| Setting | Description |
| LIGHTS ONLY | This setting will activate the lights of the item. No animation or sound. |
| OFF | In this mode, the item is only activated for a 15 second activity cycle if the Step Pad is pressed. Otherwise, it remains off. |
| TIMER/SENSOR | This mode runs on a 6-hour active and 18-hour off cycle that repeats daily. During the active period, the IR sensor (range up to 4 m/13 ft, 80° angle) activates one animation and sound cycle. Lights stay on continuously during the 6-hour active phase, even without sensor activation. |
| Adjustable dial; turn all the way down to mute. |
Important Setup Tips
- Adapter must be tightly screwed in at the Function Control Box and plugged into a wall outlet.
- Switch on the control box should be set to your preferred mode.
- If not functioning properly, ensure that cables are connected to their corresponding cable as shown in the instruction sheet.
- Be sure nothing is blocking movement or caught in moving parts.
- Ensure the base surface is flat and nothing blocks the movement.
- Check that the speaker volume is turned up.
- Indoor item.
Troubleshooting & FAQs
What power adapter should I use with 4 ft. Animated LED Holiday Olaf?
A: This item requires 3A Indoor Adapter.
What are the dimensions of the screws?
A: Neck Bolt: 1.5 inch long, 0.7 inch diameter
Body to Base bolts (Step 1.2, C): 2 inch long, 0.7 diameter