Product Overview
- Model Number: 280-5248
- Height: 8 ft.
- Motion: mouth moves as he speaks
- Sound: 7 different phrases with party music
- Lighting: blue animated projection eyes
- Activation: Infrared motion sensor
- Indoor/Outdoor item
- Power Requirements: 1.5A Outdoor Adapter
Replacement Parts
Purchase Replacement Parts here
Limited stock: Parts available while supplies last!
Parts List:
Assembly Instructions
- Recommended: At least 1 adult
- Ensure: All parts are properly connected as shown in the instruction manual
- Download: Parts List and Assembly Instructions PDF
Control Box Settings
| Setting | Description |
SENSOR |
Lights, sound, and animation activate when the IR sensor detects motion, running one full cycle per activation. The sensor range is up to 2 m / 6.5 ft. within an 80° angle (side-to-side, above, and below). |
OFF/STEP PAD |
Activates one cycle of lights, animation and sound when triggered by a Step Pad or Try Me Button. Remains off otherwise. |
ON |
Continuously runs lights, sound, and animation until the settings are changed. |
| Adjustable dial; turn all the way down to mute. |
Important Setup Tips
- Adapter must be tightly screwed in at the Function Control Box and plugged into a wall outlet.
- Switch on the control box should be set to your preferred mode.
- If not functioning properly, ensure that cables are connected to their corresponding cable as shown in the instruction sheet.
- Be sure nothing is blocking movement or caught in moving parts.
- Ensure the base surface is flat and nothing blocks the movement.
- Check that the speaker volume is turned up.
- Indoor/Outdoor item.
Troubleshooting & FAQs
What power adapter should I use with 8 ft. Giant Animated Skeleton with Projection Eyes?
A: This item requires 1.5A Outdoor Adapter.