Product Overview
- Model Number: 5125211
- Lighting: LED lights
- Motion: Moving arms and mouth
- Sound: Several spooky phrases
- Activation: Infrared motion sensor
- Power Requirements: 2A Outdoor Adapter
Replacement Parts
Purchase Replacement Parts here
Limited stock: Parts available while supplies last!
Parts List:
Assembly Instructions
- Recommended: 1 adult
- Ensure: All parts are properly connected as shown in the instruction manual
- Download: Parts List and Assembly Instructions PDF
Control Box Settings
| Setting | Description |
| SENSOR | In this mode, lights, sound, and animation activate for one cycle each time the Infra-red (IR) sensor is triggered. The sensor detects motion within an 80-degree range from all directions, up to 2 meters (6.5 feet) away. |
| OFF/TRY ME | Power OFF |
| ON | This mode continuously runs the lights, sound, and animation indefinitely until the settings are changed. |
| Adjustable dial; turn all the way down to mute. |
Important Setup Tips
- Adapter must be tightly screwed in at the Function Control Box and plugged into a wall outlet.
- Switch on the control box should be set to your preferred mode.
- If not functioning properly, ensure that cables are connected to their corresponding cable as shown in the instruction sheet.
- Ensure that the floor or surface that the item sits on is flat and level.
- Ensure that the volume is not all the way down.
- Be sure nothing is blocking the sensor.
- Indoor/Outdoor item.
Troubleshooting & FAQs
Q: What adapter should I use with 2 Crystal Ball Witches?
A: This item requires 2A Outdoor Adapter.