3.5 ft. Animated LED Scarred Chucky Doll

Product Overview

  • Model Number: 25SV24962
  • Height: 3.5 feet
  • Motion: Body, arm, head and mouth movement
  • Sound: 5 spooky phrases
  • Activation: Infrared motion sensor
  • Indoor item
  • Power Requirements: 3A Indoor Adapter

 

Replacement Parts

Purchase Replacement Parts here

Limited stock: Parts available while supplies last!

Parts List:

 

Assembly Instructions

 

Control Box Settings

Setting

Description 

LIGHTS ONLY

Lights stay on continuously until the mode is changed. No sound or animation.
TIMER/SENSOR Activates SENSOR mode for 6 hours, then turns off for 18 hours. During the active period, motion within 13 ft (80° range) triggers one cycle of Chucky’s animation and sound. Repeats daily until the setting is changed.

OFF/STEP PAD

All features are off unless activated by an optional Step Pad or Try Me Button(not included).
Adjustable dial; turn all the way down to mute.

 

Important Setup Tips

  • Adapter must be tightly screwed in at the Function Control Box and plugged into a wall outlet.
  • Switch on the control box should be set to your preferred mode.
  • If not functioning properly, ensure that cables are connected to their corresponding cable as shown in the instruction sheet.
  • Be sure nothing is blocking movement or caught in moving parts.
  • Ensure the base surface is flat and nothing blocks the movement.
  • Check that the speaker volume is turned up.
  • Indoor item.

Troubleshooting & FAQs


What power adapter should I use with 3.5 ft. Animated LED Scarred Chucky Doll? 

My 3.5 ft. Scarred Chucky animatronic moves correctly (head, arm, body, mouth), but there is no sound, even with the volume up. What can I do?

A: The sound on Scarred Chucky comes directly from the control box. Since the prop moves, the sensor is working properly. Follow these steps to diagnose the issue:

  1. Disconnect the head from the control box.

  2. Turn Chucky on and trigger the sensor:

    • If sound works with the head unplugged, the head wiring is interfering with the sound, and the next step would be replacing the head.

    • If the sound does not work even with the head unplugged, the next step would be replacing the control box.