Product Overview

• Model Number: 22SV23274
• Height: 8 ft.
• Motion: Head moves and tilts from side to side
• Sound: 5 different spooky phrases
• Lighting: LED eyes, chest, and skull on scythe
• Activation: infrared motion sensor
• Indoor
• Power Requirements: 2A Indoor Adapter

Replacement Parts

This product is no longer supported by our Parts Replacement Program.  

Parts List:

Assembly Instructions

• Recommended: 1 adult
• Ensure: All parts are properly connected as shown in the instruction manual
• Download: Parts List and Assembly Instructions PDF

Control Box Settings

Setting	Description
O	This switch mode will activate the lights in the reaper's eyes, the skull eyes of the scythe blade and the lights in the chest. There’s no animation on this setting.
SENSOR	This switch mode will activate the lights, sound and animation for 1 audio cycle only when triggered by the Sensor.
TIMER	This setting will operate the same as sensor mode within a 6HR On/18 HR Off period.
I	Activates one audio cycle when triggered by a Step Here Try Me Pad (not included). Remains off otherwise.
	Adjustable dial; turn all the way down to mute.

Important Setup Tips

• Adapter must be tightly screwed in at the Function Control Box and plugged into a wall outlet.
• Switch on the control box should be set to your preferred mode.
• If not functioning properly, ensure that cables are connected to their corresponding cable as shown in the instruction sheet.
• Be sure nothing is blocking movement or caught in moving parts.
• Ensure the base surface is flat and nothing blocks the movement.
• Check that the speaker volume is turned up.

• Indoor item.

   

Troubleshooting & FAQs