Product Overview
- Model Number: 23SV23970
- Height: 5 ft.
- Motion: Head turns and arms go up and down
- Sound: Several funny phrases
- Lighting: LCD eyes
- Activation: Infrared motion sensor
- Power Requirements: 1.5A Indoor Adapter
Replacement Parts
This product is no longer supported by our Parts Replacement Program.
Parts List:
Assembly Instructions
- Recommended: 1 adult
- Ensure: All parts are properly connected as shown in the instruction manual
- Download: Parts List and Assembly Instructions PDF
Control Box Settings
| Setting | Description |
| SENSOR | Lights, sound, and animation activate for 1 cycle when motion is detected (up to 6.5 ft, 80° range). Lights stay on between activations. Sound and movement activate only in SENSOR mode when triggered. |
| OFF/TRY ME | Activates one audio cycle when triggered by a Step Here Try Me Pad (not included). Stays off otherwise. |
| ON | This switch mode will continuously operate the lights, sound, and animation of the item. |
| Adjustable dial; turn all the way down to mute. |
Important Setup Tips
- Adapter must be tightly screwed in at the Function Control Box and plugged into a wall outlet.
- Switch on the control box should be set to your preferred mode.
- If not functioning properly, ensure that cables are connected to their corresponding cable as shown in the instruction sheet.
- Ensure the base surface is flat and nothing blocks the sensor.
- Check that the speaker volume is turned up.
- Indoor item.
Troubleshooting & FAQs
Q: What adapter should I use with 5 ft. Tiny Terror Clown?
A: This item requires 1.5A Indoor Adapter.