Product Overview
- Model Number: 5124733, 23SV23799, 24SV24668
- Height: 6.5 feet
- Motion: Torso
- Lighting: LED lights
- Activation: Infrared motion sensor
- Power Requirements: 2A Indoor Adapter
Replacement Parts
This product is no longer supported by our Parts Replacement Program.
Parts List:
Assembly Instructions
- Recommended: 1 adult
- Ensure: All parts are properly connected as shown in the instruction manual
- Download: Parts List and Assembly Instructions for 2024 (model 24SV24668) Gravedigger PDF
Control Box Settings
Setting |
Description |
SENSOR |
Lights, sound, and animation activate for one audio cycle when the IR sensor detects motion (up to 6.5 ft, 80° range; left to right, above, or below). |
OFF/STEP PAD |
Activates one audio cycle when triggered by a Step Here Try Me Pad (not included). Stays off otherwise. |
ON |
This switch mode will continuously operate the lights, sound, and animation of the item. |
| Adjustable dial; turn all the way down to mute. |
Important Setup Tips
- Adapter must be tightly screwed in at the Function Control Box and plugged into a wall outlet.
- Switch on the control box should be set to your preferred mode.
- If not functioning properly, ensure that cables are connected to their corresponding cable as shown in the instruction sheet.
- Ensure the base surface is flat and nothing blocks the sensor.
- Check that the speaker volume is turned up.
- Indoor item.
Troubleshooting & FAQs
Q: What adapter should I use with 6.5 ft. Animated LED Gravedigger?
A: This item requires 2A Indoor Adapter
Q: Can I purchase parts for 6.5 ft. Animated LED Gravedigger models 5124733 and 23SV23799?
A: Unfortunately, models 5124733 and 23SV23799 are no longer supported by our Parts Replacement Program.
Q: Can I order 2024 replacement parts for my 2021–2023 Gravedigger?
A: Unfortunately, the replacement parts are not compatible between models.