Product Overview
- Model Number: 25SV25093
- Height: 5 ft.
- Lighting: LED Eyes
- Activation: Eyes can be controlled at the Control Panel.
- Poseable mouth
- Indoor/Outdoor
- Power Requirements: 1.5A Outdoor Adapter or 4 x 1.5V C batteries
Replacement Parts
Purchase Replacement Parts here
Limited stock: Parts available while supplies last!
Parts List:
Assembly Instructions
- Recommended: 1 adult
- Ensure: All parts are properly connected as shown in the instruction manual
- Download: Parts List and Assembly Instructions PDF
Control Box Settings
| Button | Function Description |
| ON/TIMER | Press the power button once to activate the LED eyes. In this mode, the LED eyes will stay on for 6 hours and then turn off for 18 hours. This cycle will repeat indefinitely until the settings are changed. |
| OFF | Press power button a second time to turn LED eyes OFF. |
Important Setup Tips
- Adapter must be tightly screwed in at the Function Control Box and plugged into a wall outlet.
- Switch on the control box should be set to your preferred mode.
- If eyes do not light up ensure that cables are connected to their corresponding cable as shown in the instruction sheet.
- Ensure the base surface is flat and nothing blocks the movement.
- Indoor item.
Troubleshooting & FAQs
Q: Can I use Skelly's Cat with external timers?
A: Skelly's Cat is not compatible with external timers at this time. We recommend to use built in Timer.
Press the button once to active Timer setting, the LED eyes will stay on for 6 hours and then turn off for 18 hours.