Product Overview

Replacement Parts

Limited stock: Parts available while supplies last!

Parts List:

Adapter must be tightly screwed in at the Function Control Box and plugged into a wall outlet.
Switch on the control box should be set to your preferred mode.
If not functioning properly, ensure that cables are connected to their corresponding cable as shown in the instruction sheet.
Be sure nothing is blocking movement or caught in moving parts.
Ensure the base surface is flat and nothing blocks the movement.
Check that the speaker volume is turned up.
The control box has a red light indicator.
Indoor/Outdoor item.

Q: What adapter should I use with 8 ft. Giant-Sized Animated LED Wyvern?

A: This item requires 3A Outdoor Adapter.

Q: What color functions are available on this item?

A: The Wyvern features 3 LED effects: 1. Red 2. Green 3. Blue. Press the Mode button to change the color.

Q: What's the length of the Tether Cable Part Y?

A: The length of the Tether Cable is 110.5" including hoops.

Q: What's the size of the Loop Screw Part X?

A: Loop Screw M8 1.25 and 7”

Setting	Description
LIGHTS ONLY	Lights activate indefinitely until the setting is changed. No sound or animation.
OFF/STEP PAD	Activates one cycle when triggered by a Step Pad or Try Me Button (not included). Stays off otherwise.
TIMER/SENSOR	LEDs stay on and the sensor is active for 6 hours, followed by 18 hours off. During the active period, motion within 13 ft (80° range) triggers one cycle of sound, lights, and animation. Repeats daily until the setting is changed.
MODE	This button will change the LED effects on the prop. There are 3 LED effect settings to cycle through: 1. Red 2. Green 3. Blue
	Adjustable dial; turn all the way down to mute.